Electrical impedance

You don't need to be Editor-In-Chief to add or edit content to WikiDoc. You can begin to add to or edit text on this WikiDoc page by clicking on the edit button at the top of this page. Next enter or edit the information that you would like to appear here. Once you are done editing, scroll down and click the Save page button at the bottom of the page.

Jump to: navigation, search

Please Take Over This Page and Apply to be Editor-In-Chief for this topic: There can be one or more than one Editor-In-Chief. You may also apply to be an Associate Editor-In-Chief of one of the subtopics below. Please mail us [1] to indicate your interest in serving either as an Editor-In-Chief of the entire topic or as an Associate Editor-In-Chief for a subtopic. Please be sure to attach your CV and or biographical sketch.


Electromagnetism
Key topics
Electricity · Magnetism
Electrostatics
 · Electric charge · Coulomb’s law · Electric field · Electric flux · Gauss’ law · Electric potential · Electrostatic induction · Electric dipole moment ·
Magnetostatics
 · Ampère’s law · Electric current · Magnetic field · Magnetic flux · Biot–Savart law · Magnetic dipole moment · Gauss’s law for magnetism ·
Electrodynamics
 · Free space · Lorentz force law · EMF · Electromagnetic induction · Faraday’s law · Displacement current · Maxwell’s equations · EM field · Electromagnetic radiation · Liénard-Wiechert Potentials · Maxwell tensor · Eddy current ·
Electrical Network
 · Electrical conduction · Electrical resistance · Capacitance · Inductance · Impedance · Resonant cavities · Waveguides ·
Covariant formulation
 · Electromagnetic tensor · EM Stress-energy tensor · Four-current · Four-potential ·
Scientists
This box: view • talk • edit

Electrical impedance, or simply impedance, describes a measure of opposition to a sinusoidal alternating current (AC). Electrical impedance extends the concept of resistance to AC circuits, describing not only the relative amplitudes of the voltage and current, but also the relative phases. In general impedance is a complex quantity \scriptstyle{\tilde{Z}} and the term complex impedance may be used interchangeably; the polar form conveniently captures both magnitude and phase characteristics,

\tilde{Z} = Z e^{j\theta} \quad

where the magnitude \scriptstyle{Z} gives the change in voltage amplitude for a given current amplitude, while the argument \scriptstyle{\theta} gives the phase difference between voltage and current. In Cartesian form,

\tilde{Z} = R + j\Chi \quad

where the real part of impedance is the resistance \scriptstyle{R} and the imaginary part is the reactance \scriptstyle{\Chi}. Dimensionally, impedance is the same as resistance; the SI unit is the ohm. The term impedance was coined by Oliver Heaviside in July 1886.

Image:Complex impedance plane.png
A graphical representation of the complex impedance plane. Note that while reactance \scriptstyle{\Chi} can be either positive or negative, resistance \scriptstyle{R} is always positive.

Ohm's law

Image:General AC circuit.png
An AC supply applying a voltage \scriptstyle{V}, across a load \scriptstyle{Z}, driving a current \scriptstyle{I}.
Main article: Ohm's law

We can understand this by substituting it into Ohm's law.[1][1]

\tilde{V} = \tilde{I}\tilde{Z} = \tilde{I} Z e^{j\theta} \quad

The magnitude of the impedance \scriptstyle{Z} acts just like resistance, giving the drop in voltage amplitude across an impedance \scriptstyle{\tilde{Z}} for a given current \scriptstyle{\tilde{I}}. The phase factor tells us that the current lags the voltage by a phase of θ (i.e. in the time domain, the current signal is shifted \frac{\theta T}{2 \pi} to the right with respect to the voltage signal).[1]

Just as impedance extends Ohm's law to cover AC circuits, other results from DC circuit analysis such as voltage division, current division, Thevenin's theorem, and Norton's theorem, can also be extended to AC circuits by replacing resistance with impedance.

Complex voltage and current

Image:Impedance symbol comparison.svg
Generalized impedances in a circuit can be drawn with the same symbol as a resistor (US ANSI or DIN Euro) or with a labeled box.

In order to simplify calculations, sinusoidal voltage and current waves are commonly represented as complex-valued functions of time denoted as \scriptstyle{\tilde{V}} and \scriptstyle{\tilde{I}}.[1][1]

\ \tilde{V} = V_0e^{j(\omega t + \phi_V)}
\ \tilde{I} = I_0e^{j(\omega t + \phi_I)}

Impedance is defined as the ratio of these quantities.

\ \tilde{Z} = {\tilde{V} \over \tilde{I}}

Substituting these into Ohm's law we have

\begin{align} V_0e^{j(\omega t + \phi_V)} &= I_0e^{j(\omega t + \phi_I)} Z e^{j\theta} \\ &= I_0 Z e^{j(\omega t + \phi_I + \theta)} \end{align}

Noting that this must hold for all t, we may equate the magnitudes and phases to obtain

\ V_0 = I_0 Z \quad
\ \phi_V = \phi_I + \theta \quad

The magnitude equation is the familiar Ohm's law applied to the voltage and current amplitudes, while the second equation defines the phase relationship.

Validity of complex representation

This representation using complex exponentials may be justified by noting that (by Euler's formula):

\ \cos(\omega t + \phi) = \frac{1}{2} \Big[ e^{j(\omega t + \phi)} + e^{-j(\omega t + \phi)}\Big]

i.e. a real-valued sinusoidal function (which may represent our voltage or current waveform) may be broken into two complex-valued functions. By the principle of superposition, we may analyse the behaviour of the sinusoid on the left-hand side by analysing the behaviour of the two complex terms on the right-hand side. Given the symmetry, we only need to perform the analysis for one right-hand term; the results will be identical for the other. At the end of any calculation, we may return to real-valued sinusoids by further noting that

\ \cos(\omega t + \phi) = \Re \Big\{ e^{j(\omega t + \phi)} \Big\}

In other words, we simply take the real part of the result.

Phasors

Main article: Phasor (electronics)

A phasor is a constant complex number, usually expressed in exponential form, representing the complex amplitude (magnitude and phase) of a sinusoidal function of time. Phasors are used by electrical engineers to simplify computations involving sinusoids, where they can often reduce a differential equation problem to an algebraic one.

The impedance of a circuit element can be defined as the ratio of the phasor voltage across the element to the phasor current through the element, as determined by the relative amplitudes and phases of the voltage and current. This is identical to the definition from Ohm's law given above, recognising that the factors of \scriptstyle{e^{j\omega t}} cancel.

Device examples

Main article: Impedance of different devices (derivations)
Image:VI phase.png
The phase angles in the equations for the impedance of inductors and capacitors indicate that the voltage across a capacitor lags the current through it by a phase of \scriptstyle{\pi/2}, while the voltage across an inductor leads the current through it by \scriptstyle{\pi/2}. The identical voltage and current amplitudes tell us that the magnitude of the impedance is equal to one.

The impedance of a resistor is purely real and is referred to as a resistive impedance.

\tilde{Z}_R = R \quad

Inductors and capacitors have a purely imaginary reactive impedance.

\tilde{Z}_L = j\omega L \quad
\tilde{Z}_C = {1 \over j\omega C}

Note the following identities for the imaginary unit and its reciprocal.

j = \cos{\left({\pi \over 2}\right)} + j\sin{\left({\pi \over 2}\right)} = e^{j{\pi \over 2}}
{1 \over j} = -j = \cos{\left(-{\pi \over 2}\right)} + j\sin{\left(-{\pi \over 2}\right)} = e^{j(-{\pi \over 2})}

Thus we can rewrite the inductor and capacitor impedance equations in polar form

\tilde{Z}_L = \omega Le^{j{\pi \over 2}}
\tilde{Z}_C = {1 \over \omega C}e^{j(-{\pi \over 2})}

The magnitude tells us the change in voltage amplitude for a given current amplitude through our impedance, while the exponential factors give the phase relationship.

Resistance vs Reactance

It is important to realise that resistance and reactance are not individually significant; together they determine the magnitude and phase of the impedance, through the following relations.

|\tilde{Z}| = \sqrt{\tilde{Z}\tilde{Z}^*} = \sqrt{R^2 + \Chi^2}
\theta = \arctan{\left({\Chi \over R}\right)}

In many applications the relative phase of the voltage and current is not critical so only the magnitude of the impedance is significant.

Resistance

Main article: Electrical resistance

Resistance \scriptstyle{R} is the real part of impedance; a device with a purely resistive impedance exhibits no phase shift between the voltage and current.

R = Z \cos{\theta} \quad

Reactance

Main article: Reactance

Reactance \scriptstyle{\Chi} is the imaginary part of the impedance; a component with a finite reactance induces a phase shift θ between the voltage across it and the current through it.

\Chi = Z \sin{\theta} \quad

A reactive component is distinguished by the fact that the sinusoidal voltage across the component is in quadrature with the sinusoidal current through the component. This implies that the component alternately absorbs energy from the circuit and then returns energy to the circuit. A pure reactance will not dissipate any power.

Capacitive reactance

Main article: Capacitor

A capacitor has a purely reactive impedance which is inversely proportional to the signal frequency. A capacitor consists of two conductors separated by an insulator, also known as a dielectric.

At low frequencies a capacitor is open circuit, as no current flows in the dielectric. A DC voltage applied across a capacitor causes charge to accumulate on one side, the electric field due to the accumulated charge is the source of the opposition to the flow of current. When the potential associated with the charge exactly balances the applied voltage, the current goes to zero.

Driven by an AC supply a capacitor will only accumulate a limited amount of charge before the potential difference changes sign and the charge dissipates. The higher the frequency, the less charge will accumulate and the smaller the opposition to the flow of current.

Inductive reactance

Main article: Inductor

An inductor has a purely reactive impedance which is proportional to the signal frequency. An inductor consists of a coiled conductor. Faraday's law of electromagnetic induction gives the back emf \scriptstyle{\mathcal{E}} (voltage opposing current) due to a rate-of-change of magnetic field \scriptstyle{B} through a current loop.

\mathcal{E} = -{{d\Phi_B} \over dt}.

For an inductor consisting of a coil with N loops this gives.

\mathcal{E} = -N{d\Phi_B \over dt}.

The back-emf is the source of the opposition to current flow. A constant direct current has a zero rate-of-change, and sees an inductor as a short-circuit (it is typically made from a material with a low resistivity). An alternating current has a time rate-of-change that is proportional to frequency and so the inductive reactance is proportional to frequency.

Combining impedances

Main article: Series and parallel circuits

The total impedance of any network of components can be calculated using the rules for combining impedances in series and parallel. The rules are identical to those used for combining resistances, although they require some familiarity with complex numbers.

Series combination

For components connected in series, the current through each circuit element is the same; the ratio of voltages across any two elements is the inverse ratio of their impedances.

Image:Impedances in series.svg

\tilde{Z}_{eq} = \tilde{Z}_1 + \tilde{Z}_2 = (R_1 + R_2) + j(\Chi_1 + \Chi_2) \quad

Parallel combination

For components connected in parallel, the voltage across each circuit element is the same; the ratio of currents through any two elements is the inverse ratio of their impedances.

Image:Impedances in parallel.svg
\tilde{Z}_{eq} = \tilde{Z}_1 \| \tilde{Z}_2 = \left(\tilde{Z}_1^{-1} + \tilde{Z}_2^{-1}\right)^{-1} = {\tilde{Z}_1 \tilde{Z}_2 \over \tilde{Z}_1 + \tilde{Z}_2} \quad

The equivalent impedance \scriptstyle{\tilde{Z}_{eq}} can be calculated in terms of the equivalent resistance \scriptstyle{R_{eq}} and reactance \scriptstyle{\Chi_{eq}}.[1]

\tilde{Z}_{eq} = R_{eq} + j \Chi_{eq} \quad
R_{eq} = { (\Chi_1 R_2 + \Chi_2 R_1) (\Chi_1 + \Chi_2) + (R_1 R_2 - \Chi_1 \Chi_2) (R_1 + R_2) \over (R_1 + R_2)^2 + (\Chi_1 + \Chi_2)^2}
\Chi_{eq} = {(\Chi_1 R_2 + \Chi_2 R_1) (R_1 + R_2) - (R_1 R_2 - \Chi_1 \Chi_2) (\Chi_1 + \Chi_2) \over (R_1 + R_2)^2 + (\Chi_1 + \Chi_2)^2}

See also

External links

References

zh-min-nan:Tiān-chú chó͘-khòng

bg:Импеданс ca:Impedància cs:Impedance da:Impedans de:Impedanzeo:Impedanco eu:Inpedantzia elektriko fr:Impédance (électricité) ko:임피던스 it:Impedenza he:עכבה חשמלית hu:Impedancia nl:Impedantie ja:インピーダンス no:Impedanssk:Impedancia sl:Impedanca sr:Електрична импеданса sh:Električna impedansa fi:Impedanssi sv:Impedans ta:மாறுமின் மறிமம் vi:Trở khánguk:Імпеданс

WikiDoc Help Menu

Quick Start..

Editing basics

Advanced editing

Communicating your edits

Help Videos You Can Watch


Acknowledgement and Attribution Regarding Sources of Content

Some of the initial content on this page may be incorporated in part from copyleft sources in the public domain including wikis such as Wikipedia and AskDrWiki. Drug information for patients came from the The National Library of Medicine. Infectious disease information may have come from the Centers for Disease Control (CDC). Differential Diagnoses are drawn from clinicians as well as an amalgamation of 3 sources: 1.The Disease Database; 2. Kahan, Scott, Smith, Ellen G. In A Page: Signs and Symptoms. Malden, Massachusetts: Blackwell Publishing, 2004:3; 3. Sailer, Christian, Wasner, Susanne. Differential Diagnosis Pocket. Hermosa Beach, CA: Borm Bruckmeir Publishing LLC, 2002:7 .

Retrieved from "http://en.wikidoc.org/index.php/Electrical_impedance"
Personal tools