Emulsion
You don't need to be Editor-In-Chief to add or edit content to WikiDoc. You can begin to add to or edit text on this WikiDoc page by clicking on the edit button at the top of this page. Next enter or edit the information that you would like to appear here. Once you are done editing, scroll down and click the Save page button at the bottom of the page.
Editor-In-Chief: C. Michael Gibson, M.S., M.D. [1] Phone:617-525-6884
Please Take Over This Page and Apply to be Editor-In-Chief for this topic: There can be one or more than one Editor-In-Chief. You may also apply to be an Associate Editor-In-Chief of one of the subtopics below. Please mail us [2] to indicate your interest in serving either as an Editor-In-Chief of the entire topic or as an Associate Editor-In-Chief for a subtopic. Please be sure to attach your CV and or biographical sketch.
Overview
An emulsion (IPA: /ɪˈmʌlʃən/[1]) is a mixture of two immiscible (unblendable) substances. One substance (the dispersed phase) is dispersed in the other (the continuous phase). Examples of emulsions include butter and margarine, milk and cream, espresso, mayonnaise, the photo-sensitive side of photographic film, magmas and cutting fluid for metal working. In butter and margarine, oil surrounds droplets of water (a water-in-oil emulsion). In milk and cream, water surrounds droplets of oil (an oil-in-water emulsion). In certain types of magma, globules of liquid NiFe may be dispersed within a continuous phase of liquid silicates. Emulsification is the process by which emulsions are prepared.
Emulsion is also a term used in the oil field as untreated well production that consists primarily of crude oil and water.
Operation
Emulsions tend to have a cloudy appearance, because the many phase interfaces (the boundary between the phases is called the interface) scatter light that passes through the emulsion. Emulsions are unstable and thus do not form spontaneously. Energy input through shaking, stirring, homogenizers, or spray processes are needed to form an emulsion. Over time, emulsions tend to revert to the stable state of oil separated from water. Surface active substances (surfactants) can increase the kinetic stability of emulsions greatly so that, once formed, the emulsion does not change significantly over years of storage. Homemade oil and vinegar salad dressing is an example of an unstable emulsion that will quickly separate unless shaken continuously. This phenomenon is called coalescence, and happens when small droplets recombine to form bigger ones. Fluid emulsions can also suffer from creaming, the migration of one of the substances to the top of the emulsion under the influence of buoyancy or centripetal force when a centrifuge is used.
Emulsions are part of a more general class of two-phase systems of matter called colloids. Although the terms colloid and emulsion are sometimes used interchangeably, emulsion tends to imply that both the dispersed and the continuous phase are liquid.
There are three types of emulsion instability: flocculation, where the particles form clumps; creaming, where the particles concentrate towards the surface (or bottom, depending on the relative density of the two phases) of the mixture while staying separated; and breaking and coalescence where the particles coalesce and form a layer of liquid.
Emulsifier
An emulsifier (also known as an emulgent) is a substance which stabilizes an emulsion, frequently a surfactant. Examples of food emulsifiers are egg yolk (where the main emulsifying chemical is lecithin), honey and mustard, where a variety of chemicals in the mucilage surrounding the seed hull act as emulsifiers; proteins and low-molecular weight emulsifiers are common as well. In some cases, particles can stabilize emulsions as well through a mechanism called Pickering stabilization. Both mayonnaise and hollandaise sauce are oil-in-water emulsions that are stabilized with egg yolk lecithin. Detergents are another class of surfactant, and will chemically interact with both oil and water, thus stabilising the interface between oil or water droplets in suspension. This principle is exploited in soap to remove grease for the purpose of cleaning. A wide variety of emulsifiers are used in pharmacy to prepare emulsions such as creams and lotions.
Whether an emulsion turns into a water-in-oil emulsion or an oil-in-water emulsion depends on the volume fraction of both phases and on the type of emulsifier. Generally, the Bancroft rule applies: emulsifiers and emulsifying particles tend to promote dispersion of the phase in which they do not dissolve very well; for example, proteins dissolve better in water than in oil and so tend to form oil-in-water emulsions (that is they promote the dispersion of oil droplets throughout a continuous phase of water).
Nanoemulsion
Nanoemulsion is a type of emulsion in which the sizes of the particles in the dispersed phase are defined as less than 1000 nanometers.
In medicine, a nanoemulsion of soybean oil to create drops of 400-600 nanometers in diameter will kill many pathogens such as bacteria and viruses.[1] The process is not chemical, as with other types of anti-pathogenic treatments, but physical. The smaller the droplet, the greater the surface tension and thus the greater the force to merge with other lipids. The oil is emulsified with detergents to stabilize the emulsion (the droplets won't merge with one another), so when they encounter lipids on a bacterial membrane or a virus envelope, they force the lipids to merge with themselves. On a mass scale, this effectively disintegrates the membrane and kills the pathogen.
Remarkably, the soybean oil emulsion does not harm normal human cells nor the cells of most other higher organisms. The exceptions are sperm cells and blood cells, which are vulnerable to nanoemulsions due to their membrane structures. For this reason, nanoemulsions of this type are not yet ready to be used intravenously.
The most effective application of this type of nanoemulsion is for the disinfection of surfaces. Some types of nanoemulsions have been shown to effectively destroy HIV-1 and various tuberculosis pathogens, for example, on non-porous surfaces.
See also
References
External links
- Microfluidic Production of Monodispersed Submicron EmulsionsThrough Filtration and Sorting of Satellite Drops 2005-652
- Video images of the process of membrane emulsification
- Video image of monodisperse droplets produced by membrane emulsification
- Company website of Nanomi, specialized in membrane emulsification
- Explanation of the process of membrane emulsification
- Medicine at Michigan
- Veterinary Applications
- Dispersion Technology
bs:Emulzija
ca:Emulsió
cs:Emulze
da:Emulsion
de:Emulsion
et:Emulsioonfr:Émulsion
gl:Emulsión
hr:Emulzija
id:Emulsi
it:Emulsione
he:חומר מתחלב
ms:Emulsi
nl:Emulsie
ja:エマルション
no:Emulsjonsl:Emulzija
sr:Емулзија
sh:Emulzija
fi:Emulsio
sv:Emulsion
vi:Nhũ tương
th:อิมัลชันuk:Емульсія
Acknowledgement and Attribution Regarding Sources of Content
Some of the initial content on this page may be incorporated in part from copyleft sources in the public domain including wikis such as Wikipedia and AskDrWiki. Drug information for patients came from the The National Library of Medicine. Infectious disease information may have come from the Centers for Disease Control (CDC). Differential Diagnoses are drawn from clinicians as well as an amalgamation of 3 sources: 1.The Disease Database; 2. Kahan, Scott, Smith, Ellen G. In A Page: Signs and Symptoms. Malden, Massachusetts: Blackwell Publishing, 2004:3; 3. Sailer, Christian, Wasner, Susanne. Differential Diagnosis Pocket. Hermosa Beach, CA: Borm Bruckmeir Publishing LLC, 2002:7 .
