Lithium chloride

You don't need to be Editor-In-Chief to add or edit content to WikiDoc. You can begin to add to or edit text on this WikiDoc page by clicking on the edit button at the top of this page. Next enter or edit the information that you would like to appear here. Once you are done editing, scroll down and click the Save page button at the bottom of the page.

Lithium chloride
Image:Lithium chloride.jpg
Image:Lithium-chloride-3D-ionic.png
Identifiers
CAS number	[7447-41-8] (anhydrous) [85144-11-2] (hydrate)
RTECS number	OJ5950000 (anhydrous)
Properties
Molecular formula	LiCl
Molar mass	42.39 g/mol
Appearance	White crystalline solid
Density	2.07 g/cm³, solid
Melting point	605 °C (878 K)
Boiling point	>1300 °C (>1570 K)
Solubility in water	67.2 g/100 ml (0 °C)
Structure
Coordination geometry	Octahedral
Dipole moment	7.13 D (gas)
Hazards
R-phrases	22-36/37/38
S-phrases	26-36/37/39
Related Compounds
Other anions	lithium fluoride; lithium bromide; lithium iodide
Other cations	sodium chloride; magnesium chloride
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) Infobox disclaimer and references

Lithium chloride, LiCl, behaves as a fairly typical ionic compound, although the Li⁺ ion is very small. The salt is hygroscopic and highly soluble in water, and is highly polar. It is more soluble in polar organic solvents such as methanol and acetone than is sodium chloride or potassium chloride.

Contents 1 Chemical properties 2 Preparation 3 Uses 4 Precautions 5 References

Chemical properties

Lithium chloride can react as a source of chloride ion. As with any other soluble ionic chloride, it will precipitate insoluble chlorides when added to a solution of an appropriate metal salt such as lead(II) nitrate:

2 LiCl(aq) + Pb(NO₃)₂(aq) → PbCl₂(s) + 2 LiNO₃(aq)

The Li⁺ ion acts as a weak Lewis acid under certain circumstances; for example one mole of lithium chloride is capable of absorbing up to four moles of ammonia.

Preparation

Lithium chloride may be prepared most simply by reaction of lithium hydroxide or lithium carbonate with hydrochloric acid. It may also be prepared by the highly exothermic reaction of lithium metal with either chlorine or anhydrous hydrogen chloride gas. Anhydrous LiCl is prepared from the hydrate by gently heating under an atmosphere of hydrogen chloride, used to prevent hydrolysis.

Uses

Lithium chloride is used for the production of lithium metal, by electrolysis of a LiCl/KCl melt at 450 °C. LiCl is also used as a brazing flux for aluminium in automobile parts. It can be used to improve the efficiency of the Stille reaction. Its desiccant properties can be used to generate potable water by absorbing moisture from the air, which is then released by heating the salt. For a short time in the 1940s lithium chloride was manufactured as a substitute for salt, but this was prohibited after the toxic effects of the compound were recognised.^{[1] [1][1]}

Precautions

Irritant. Avoid swallowing. Ingestion of this compound can result in poisoning or effects on the central nervous system due to its lithium content; see lithium pharmacology for more details.

References

• Handbook of Chemistry and Physics, 71st edition, CRC Press, Ann Arbor, Michigan, 1990.
• N. N. Greenwood, A. Earnshaw, Chemistry of the Elements, 2nd ed., Butterworth-Heinemann, Oxford, UK, 1997.
• R. Vatassery, titration analysis of LiCl, sat'd in Ethanol by AgNO3 to precipitate AgCl(s). EP of this titration gives%Cl by mass.
• H. Nechamkin, The Chemistry of the Elements, McGraw-Hill, New York, 1968.

de:Lithiumchloridgl:Cloruro de litio la:Lithii chloridum ja:塩化リチウム