Low density polyethylene
You don't need to be Editor-In-Chief to add or edit content to WikiDoc. You can begin to add to or edit text on this WikiDoc page by clicking on the edit button at the top of this page. Next enter or edit the information that you would like to appear here. Once you are done editing, scroll down and click the Save page button at the bottom of the page.
|
| |
| LDPE has SPI |
Low-density polyethylene (LDPE) is a thermoplastic made from oil. It was the first grade of polyethylene, produced in 1933 by Imperial Chemical Industries (ICI) using a high pressure process via free radical polymerisation [1]. Its manufacture employs the same method today.
Contents |
Properties
LDPE is defined by a density range of Q to 3 It is unreactive at room temperatures, except by strong oxidizing agents, and some solvents cause swelling. It can withstand temperatures of 80 °C continuously and 95 °C for a short time. Made in translucent or opaque variations, it is quite flexible, and tough to the degree of being almost unbreakable.
It has more branching (on about 2% of the carbon atoms) than HDPE, so its intermolecular forces (instantaneous-dipole induced-dipole attraction) are weaker, its tensile strength is lower, and its resilience is higher. Also, since its molecules are less tightly packed and less crystalline because of the side branches, its density is lower.
Physical qualities
- Maximum Temperature: 176 °F (80 °C)
- Minimum Temperature: −58 °F (−50 °C)
- Autoclavable: No
- Melting Point: 248 °F (120 °C)
- Tensile Strength: 1700 psi (11.7 MPa)
- Hardness: SD55
- UV Resistance: Poor
- Translucent
- Excellent flexibility
- Density: 0.92 g/cm³
Chemical resistance
- Excellent resistance (no attack) to dilute and concentrated acids, alcohols, bases and esters.
- Good resistance (minor attack) to aldehydes, ketones and vegetable oils.
- Limited resistance (moderate attack suitable for short term use only) to aliphatic and aromatic hydrocarbons, mineral oils and oxidizing agents.
- Poor resistance and not recommended for use with Halogenated hydrocarbons.[2]
Applications
LDPE is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, plastic bags for computer components, and various molded laboratory equipment. Its most common use is in plastic bags. Other products made from it include:
- Trays & general purpose containers
- Food storage and laboratory containers
- Corrosion-resistant work surfaces
- Parts that need to be weldable and machinable
- Parts that require flexibility, for which it serves very well
- Very soft and pliable parts
- Six-pack soda can rings
- Extrusion coating on paperboard and aluminum laminated for beverage cartons.
- Computer components, such as hard drives, screen cards and disk-drives.
See also
Template:Polymer-stubnl:LDPE
ja:低密度ポリエチレン
Acknowledgement and Attribution Regarding Sources of Content
Some of the initial content on this page may be incorporated in part from copyleft sources in the public domain including wikis such as Wikipedia and AskDrWiki. Drug information for patients came from the The National Library of Medicine. Infectious disease information may have come from the Centers for Disease Control (CDC). Differential Diagnoses are drawn from clinicians as well as an amalgamation of 3 sources: 1.The Disease Database; 2. Kahan, Scott, Smith, Ellen G. In A Page: Signs and Symptoms. Malden, Massachusetts: Blackwell Publishing, 2004:3; 3. Sailer, Christian, Wasner, Susanne. Differential Diagnosis Pocket. Hermosa Beach, CA: Borm Bruckmeir Publishing LLC, 2002:7 .
