Safety

You don't need to be Editor-In-Chief to add or edit content to WikiDoc. You can begin to add to or edit text on this WikiDoc page by clicking on the edit button at the top of this page. Next enter or edit the information that you would like to appear here. Once you are done editing, scroll down and click the Save page button at the bottom of the page.

Please Take Over This Page and Apply to be Editor-In-Chief for this topic: There can be one or more than one Editor-In-Chief. You may also apply to be an Associate Editor-In-Chief of one of the subtopics below. Please mail us [1] to indicate your interest in serving either as an Editor-In-Chief of the entire topic or as an Associate Editor-In-Chief for a subtopic. Please be sure to attach your CV and or biographical sketch.

Safety is the state of being "safe" (from French sauf), the condition of being protected against physical, social, spiritual, financial, political, emotional, occupational, psychological, educational or other types or consequences of failure, damage, error, accidents, harm or any other event which could be considered non-desirable. This can take the form of being protected from the event or from exposure to something that causes health or economical losses. It can include protection of people or of possessions.

Meanings

There also are two slightly different meanings of safety, for example, home safety may indicate a building's ability to protect against external harm events (like weather, home invasion, etc), and the second that its internal installations (like appliances, stairs, etc) are safe (not dangerous or harmful) for its habitants.

Limitations

Safety can be limited in relation to some guarantee or a standard of insurance to the quality and unharmful function of an object or organization. It is used in order to ensure that the object or organization will do only what it is meant to do.

It's important to realize that safety is relative. Eliminating all risk, if even possible, would be extremely difficult and very expensive. A safe situation is one where risks of injury or property damage are low and manageable.

Types of safety

It is important to distinguish between products that meet standards, that are safe, and those that merely feel safe. The highway safety community uses these terms:

Normative safety

Normative safety is a term used to describe products or designs that meet applicable design standards.

Substantive safety

Substantive safety means that the real-world safety history is favorable, whether or not standards are met.

Perceived safety

Perceived safety refers to the level of comfort of users. For example, traffic signals are perceived as safe, yet under some circumstances, they can increase traffic crashes at an intersection. Traffic roundabouts have a generally favorable safety record, yet often make drivers nervous.

Risks and responses

Safety is generally interpreted as implying a real and significant impact on risk of death, injury or damage to property. In response to perceived risks many interventions may be proposed with engineering responses and regulation being two of the most common.

Probably the most common individual response to perceived safety issues is insurance, which compensates for or provides restitution in the case of damage or loss.

System safety and reliability engineering

System safety and reliability engineering is an engineering discipline. Continuous changes in technology, environmental regulation and public safety concerns make the analysis of complex safety-critical systems more and more demanding.

A common fallacy, for example among electrical engineers regarding structure power systems, is that safety issues can be readily deduced. In fact, safety issues have been discovered one by one, over more than a century in the case mentioned, in the work of many thousands of practitioners, and cannot be deduced by a single individual over a few decades. A knowledge of the literature, the standards and custom in a field is a critical part of safety engineering. A combination of theory and track record of practices is involved, and track record indicates some of the areas of theory that are relevant. (In the USA, persons with a state license in Professional Engineering in Electrical Engineering are expected to be competent in this regard, the foregoing notwithstanding, but most electrical engineers have no need of the license for their work.)

Safety is often seen as one of a group of related disciplines: quality, reliability, availability, maintainability and safety. (Availability is sometimes not mentioned, on the principle that it is a simple function of reliability and maintainability.) These issues tend to determine the value of any work, and deficits in any of these areas are considered to result in a cost, beyond the cost of addressing the area in the first place; good management is then expected to minimize total cost.

Safety measures

Safety measures are activities and precautions taken to improve safety, i.e. reduce risk related to human health. Common safety measures include:

• Visual examination for dangerous situations such as emergency exits blocked because they are being used as storage areas.
• Visual examination for flaws such as cracks, peeling, loose connections.
• Chemical analysis
• X-ray analysis to see inside a sealed object such as a weld, a cement wall or an airplane outer skin.
• Destructive testing of samples
• Stress testing subjects a person or product to stresses in excess of those the person or product is designed to handle, to determining the "breaking point".
• Safety margins/Safety factors. For instance, a product rated to never be required to handle more than 200 pounds might be designed to fail under at least 400 pounds, a safety factor of two. Higher numbers are used in more sensitive applications such as medical or transit safety.
• Implementation of standard protocols and procedures so that activities are conducted in a known way.
• Training of employees, vendors, product users
• Instruction manuals explaining how to use a product or perform an activity
• Instructional videos demonstrating proper use of products
• Examination of activities by specialists to minimize physical stress or increase productivity
• Government regulation so suppliers know what standards their product is expected to meet.
• Industry regulation so suppliers know what level of quality is expected. Industry regulation is often imposed to avoid potential government regulation.
• Self-imposed regulation of various types.
• Statements of Ethics by industry organizations or an individual company so its employees know what is expected of them.
• Drug testing of employees, etc.
• Physical examinations to determine whether a person has a physical condition that would create a problem.
• Periodic evaluations of employees, departments, etc.
• Geological surveys to determine whether land or water sources are polluted, how firm the ground is at a potential building site, etc.

Standards organizations

A number of standards organizations exist that promulgate safety standards. These may be voluntary organizations or government agencies.

American National Standards Institute

A major American standards organization is the American National Standards Institute (ANSI). Usually, members of a particular industry will voluntarily form a committee to study safety issues and propose standards. Those standards are then recommended to ANSI, which reviews and adopts them. Many government regulations require that products sold or used must comply with a particular ANSI standard.

Testing laboratories

Product safety testing, for the United States, is largely controlled by the Consumer Product Safety Commission. In addition, work-place related products come under the jurisdction of OSHA, which certifies independent testing companies as Nationally Recognized Testing Laboratories (NRTL), see [2].

For other countries, there are many other organizations that have accreditation to test and/or submit test reports for safety certification. These are typically referred to as a Notified or Competent Body. The most common is the IECEE Certification Body Scheme, see [3]

Government agencies

Many government agencies set safety standards for matters under their jurisdiction, such as:

• the U.S. Consumer Product Safety Commission
• the United States Environmental Protection Agency
• the Food and Drug Administration

Non-US bodies

• British Standards Institution
• Canadian Standards Association
• Deutsches Institut für Normung
• International Organization for Standardization

See also

Template:Technologydk:Sikkerhed ar:أمن de:Sicherheit el:Ασφάλεια fr:Sécurité it:Sicurezza ms:Keselamatansimple:Save sv:Säkerhet yi:זיכערהייט

External links

• WorkSafeBC
• Worker Compensation Board Alberta
• American Society of Safety Engineers
• Safety Australia
• Library of free printable safety signs for comercial or domestic use

WikiDoc Help Menu Quick Start.. Get Started Here! How to Login How to Search Pages How to Start a New Page How to Edit a Page Cheat Sheet Editing basics Learning Basic Formatting How to make Links in WikiDoc & to External Sites How to Make Lists How to Ignoring Formatting Adding References or Footnotes to Articles Tracking Changes You Have Made How to Put an Article Into a Category When Multiple Topics Should Go To The Same Page (MI, Acute MI, AMI) Using Redirection Advanced editing How to Make Tables How to Insert Images and Other Media How to Add Video Help:How to Make Columns Web Colors How To Make Templates How to Move Pages Inserting Dynamic Dates and Times Inserting WikiDoc Statistics Editing the Table of Contents Communicating your edits Let others know what you changed: The importance of Edit Summaries Minor Edits Edit Conflicts Help Videos You Can Watch Getting Started Video

Acknowledgement and Attribution Regarding Sources of Content

Some of the initial content on this page may be incorporated in part from copyleft sources in the public domain including wikis such as Wikipedia and AskDrWiki. Drug information for patients came from the The National Library of Medicine. Infectious disease information may have come from the Centers for Disease Control (CDC). Differential Diagnoses are drawn from clinicians as well as an amalgamation of 3 sources: 1.The Disease Database; 2. Kahan, Scott, Smith, Ellen G. In A Page: Signs and Symptoms. Malden, Massachusetts: Blackwell Publishing, 2004:3; 3. Sailer, Christian, Wasner, Susanne. Differential Diagnosis Pocket. Hermosa Beach, CA: Borm Bruckmeir Publishing LLC, 2002:7 .